What should be paid attention to during the manufacturing process of glass curtain wall?

The quality of the glass curtain wall is not only related to the quality of engineering materials, but also directly related to processing and manufacturing. If the general quality of glass curtain wall processing does not meet the design requirements, it is very difficult to install the glass curtain wall, and the installation quality does not meet the specifications, which will inevitably lead to the final quality of the glass curtain wall. In order to ensure the overall quality of the glass curtain wall, the following general regulations should be paid attention to during the manufacturing process of the glass curtain wall. General rules for glass curtain wall processing and manufacturing The main results are as follows: (1) Before the glass curtain wall is officially processed and manufactured, the civil design and construction drawings should be checked. The general requirements for glass curtain wall processing and manufacturing should be re-tested on the main structure of the glass curtain wall installed. If the part in the design construction drawing can be repaired, the necessary modification should be made according to the design; the part that cannot be repaired should be adjusted according to the measurement results. Glass curtain wall. (2) The processing accuracy of each part of the glass curtain wall plays a vital role in the quality of the curtain wall installation. During the processing of the glass curtain wall parts, the specific processing personnel should be skilled and high-level, and the equipment and equipment used The requirements for the processing accuracy of curtain wall parts should be met, and the measuring tools used should be regularly certified. General rules for glass curtain wall processing and manufacturing (3) When using silicone structural sealant to fix invisible glass curtain wall components, glue should be injected into the clean ventilating room. The temperature and humidity conditions of the construction environment should meet the requirements of silicone structural sealant products. The width and thickness of the curtain wall should be Meet the design requirements. (4) In order to ensure the glue injection quality of the glass curtain wall, except for all glass curtain walls, no other forms of glass curtain wall shall be injected at the construction site. (5) The unit parts of the unit glass curtain wall and the assembly parts of the hidden frame glass curtain wall should be processed and assembled in the factory, and then shipped to the site for installation. General rules for glass curtain wall processing and manufacturing (6) Low-emissivity coated glass should be manufactured according to the bonding performance of the coating material and other technical requirements, and the construction process should be determined according to the general regulations for glass curtain wall processing and manufacturing; when the paint is compatible with the silicone structural sealant When the capacity is poor, the coating layer should be removed, and then the silicone sealant should be injected. (7) The technical performance of the silicone structural sealant is different from that of the silicone construction sealant. The purpose and function are different. The two cannot be mixed, especially the silicone structural sealant should not be used as a silicone construction sealant.