In modern home furnishings, our shower room mainstream hardware materials are basically divided into three types: aluminum
alloy profiles, copper alloy profiles and stainless steel profiles. The application of aluminum alloy profiles in shower rooms refers to titanium-magnesium alloys, which can be said to be an enhanced version of aluminum-magnesium alloys. Titanium-magnesium alloys have better corrosion resistance and mechanical properties than aluminum-magnesium alloys, but they are more difficult to process, especially hot working. The strength and toughness of titanium-magnesium alloy is three to four times that of ordinary aluminum alloy profiles. The higher the strength and toughness, the greater the pressure it can withstand. Therefore, considering safety, economy, and aesthetics, most of the sliding doors of professional shower room manufacturers now use aluminum alloys and titanium-magnesium alloys. The purity of aluminum alloy is a very important indicator. In order to save costs, some shower room manufacturers use mostly recycled scrap aluminum. The surface has many trachoma, pinholes, lines, dark color, soft texture, and is easy to deform or break. The shower room is more or less acid-alkaline in long-term contact with shampoo, body wash, and other cleansing products. Over time, the profile is difficult to clean, easy to rust, and it is easy to cause the shower room to explode. Good shower room manufacturers strictly control the selection of materials and use primary aluminum. The primary aluminum has a relatively uniform texture, and the surface will be treated with multiple layers. It can be oxidized and colored in multiple colors, with a firm coating, bright color, and corrosion resistance. The majority of copper materials in the shower room are in the form of hinges, which is the so-called flat door. Copper alloy has good corrosion resistance, wear resistance, high hardness, and is not easy to scratch. Copper is divided into cast copper and forged copper. Casting is to melt the metal and then flow into a cavity with a specific shape, and form a specific shape after solidification; forging is to heat the metal, but it is still solid, and then place it on a platform or a mold of a specific shape, using an air hammer Such tools are forged into specific shapes. The manufacturing process of cast copper is simple, it can be produced in one piece or in batches, and the price is relatively low; but because of the manufacturing principle, there will inevitably be fine pores, and the compactness is far less than that of forged copper. Forging can refine the metal grains and has higher strength than castings, but the manufacturing cost of the mold is very high, and the price will be several times higher than that of cast copper. Moreover, in order to enhance the corrosion resistance of copper alloys, plating must be added, and the degree of adhesion between the plating and the copper alloy is an important indicator of good or bad. Forging copper itself has high cost and high process requirements, so it is used in expensive high-end shower rooms. Most of the stainless steel in the shower room refers to 304 stainless steel. 304 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard. Its corrosion resistance is very good. In order to maintain corrosion resistance, 304 stainless steel must contain more than 18% Chromium, more than 8% nickel. There are so-called stainless steel shower rooms launched by many manufacturers. The actual content of chromium and nickel is not up to standard. It is synthesized by mixing 304 stainless steel production waste with other materials. Not only is the corrosion resistance not high, but also the safety is not guaranteed. In view of the production cost of 304 stainless steel, most of the low-priced stainless steel shower rooms fall into this category, and it is not recommended to buy. As we all know, the hardness of stainless steel is very high. According to this characteristic, the shower room made of stainless steel is not easy to deform and is stable for a long time. Comprehensive comparison (only compare high-quality products of three materials), hardness: forged copper>stainless steel>titanium-magnesium alloy; corrosion resistance: stainless steel>forged copper>titanium-magnesium alloy; ease of forming (will affect the fit with each component ): Titanium-magnesium alloy>Forged copper>Stainless steel. Therefore, to buy a shower room, first of all, on the premise that the structure is reasonable, safe, and the materials are qualified, and then choose the material and shape according to personal preferences, in order to find a shower room that suits you.
There is a strong need for more research on , in order to be able to provide strong and conclusive evidence of their aluminum extrusion rail effects. However, recent studies have provided valuable insights into how the intake of may result in improved aluminum window profile manufacturers.
Zeyi Aluminum Co., Ltd. is a company that offers reliable products. For customization, aluminum extrusion rail and aluminum window profile manufacturers in different styles are also in the offer list. Click Zeyi Aluminum Profiles
for more details.
aluminum extrusion rail custom aluminium extrusion is slower than aluminum window profile manufacturers but has a number of special applications, such as for aluminum extrusion rail.