On the one hand, the quality of aluminum profile comes from the level of aluminum contained in its own original materials, and on the other hand, it comes from the skill control in the production process. However, no matter what aluminum profile is, it must pay attention to an aging process, that is, the quality of the production process. Each link has a time-sensitive control. The most widely used non-ferrous metal structural material in the aluminum alloy profile industry is in aviation, aerospace, automobile, machinery manufacturing, shipbuilding, construction, and decoration. The aging process in the production process of
aluminum profiles: 1. Individual curtain wall profiles, individual door and window profiles, and industrial profiles must be aging in the same aging furnace. The temperature in the furnace is controlled within the range of 195 ℃ ± 5 ℃. After reaching the temperature, it will be out of the furnace by holding it for 3 hours. , After the oven is broken, the fan will blow for 20 minutes to cool, and the quality inspector will test the hardness. 2. The heat-insulating curtain wall profile and the heat-insulating point window profile must be aging in the same aging furnace. The temperature in the furnace should be controlled within the range of 180℃±3℃. After reaching the temperature, the temperature will be kept for 3 hours, and the blower will blow for 20 minutes. Cooling, the quality inspector tests the hardness. The most widely used non-ferrous metal structural material in the aluminum alloy profile industry is in aviation, aerospace, automobile, machinery manufacturing, shipbuilding, construction, and decoration. 3. If the aging heat insulation profile is not full of the furnace, one or two frames of individual profiles (wall thickness less than 2.0mm) may be placed in the same furnace for aging, and the aging process shall be performed according to the heat insulation profile process. The most widely used non-ferrous metal structural material in the aluminum alloy profile industry is in aviation, aerospace, automobile, machinery manufacturing, shipbuilding, construction, and decoration. 4. When lifting the material into the furnace, the end of the profile and the air guide should be held within 80-100mm. 5. When the temperature in the furnace reaches the process request temperature, the aging worker uses a glass tube thermometer to measure the actual temperature in the furnace every 30 minutes and make original records. Only by strictly controlling every aging link as above, can we guarantee the function and quality of the aluminum products that leave the factory.
For the study, researchers defined Zeyi as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Zeyi Aluminum Co., Ltd.; expanding properly is the goal of the wise business.
Many of the custom aluminium extrusion listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.
